.
Suitable for power steering and level control systems in cars and trucks, where special OEM fluids are recommended.
It flows easily at very high and low temperatures. Suitable for ABS/ASR/ASC braking systems
Manufacturer's recommendations:
Audi
Daimler Chrysler 345.0
MAN 3289
Opel B 040 0070
Porsche
Saab*
SEAT
Skoda
Volvo 1161529
VW TL 52146
High quality centralized hydraulic oil based mainly on synthetic hydrocarbons
It contains a highly effective combination of active ingredients and is characterized in particular by very good wear protection against the components of a central hydraulic system, with a very low friction level at the same time
Tips for use:
MB 344.0
MB OE no. 001989 20 03 (for comparison purposes only)
Technical specifications:
Viscosity at 40°C: 28.8 mm²/s
Viscosity at 100°C: 6.2 mm²/s
Density at 15°C: 0.850 g/cm³
Shear stability KRL 20 h 5 kn: -10%
Flash point: 200°
Container type: screw cap
Contents: 1 litre
Manufacturer approved:
BMW MTF LT-3, Ford WSS-M2C 186-A, Ford WSS-M2C 200-D2,
GM 1940004/19259104 (BOT 303), GM 1940764,
VW G 052 171 / VW G 052 178 / VW G 052 512 / VW G 052 527 A2
VW G 052 726 / VW G 055 726 / VW G 060 726 / VW G 070 726 A2
API Specifications:
GL-4, synthetic GL-4, GL-3
Synthetic GL-3
Vehicle type Cross-gear oil
EP light gear oil suitable for transmission and transaxle units where the manufacturer specifies an oil after GL-4 with SAE 75W-80
Valvoline Gear Oil 75W-80 provides excellent protection and perfect lubrication of the transmission over a wide temperature range
Optimal protection against wear, even under high stress
modern additives protection against corrosion,
Oxidation, foam, and debris.
Modern base oils and highly balanced
Additive system avoid failures
Good viscosity-temperature properties
very stable viscosity, even at low temperatures
Thanks to the uniform lubrication, the product varies slightly to reduce consumption characteristics.
The easy oil circulation ensures better cooling and therefore also for lighter fuel savings
Suitable for manual transmissions of cars, vans and other vehicles for which the manufacturer prescribes a GL-4 gear oil SAE 75W-80
Manufacturer recommendations:
API GL4
Packaging: Box
Contents: 1 litre
Vehicle type Cross-gear oil
EP light gear oil suitable for transmission and transaxle units where the manufacturer specifies an oil after GL-4 with SAE 75W-80
Valvoline Gear Oil 75W-80 provides excellent protection and perfect lubrication of the transmission over a wide temperature range
Optimal protection against wear, even under high stress
modern additives protection against corrosion,
Oxidation, foam, and debris.
Modern base oils and highly balanced
Additive system avoid failures
Good viscosity-temperature properties
very stable viscosity, even at low temperatures
Thanks to the uniform lubrication, the product varies slightly to reduce consumption characteristics.
The easy oil circulation ensures better cooling and therefore also for lighter fuel savings
Suitable for manual transmissions of cars, vans and other vehicles for which the manufacturer prescribes a GL-4 gear oil SAE 75W-80
Manufacturer recommendations:
API GL4
Packaging: Box
Contents: 1 litre
special hydraulic fluid based on mineral oil
For hydraulic support of leveling and power steering and braking systems
Excellent low temperature behavior
Designed for use fro -40°C to +100°C
Can be mixed with conventional steering gear oils
Manufacturer recommendations:
MB 343.0
specifications:
ISO 7308
DIN 51524 Part 3
applications:
power steering
rear axle
leveling
hydropneumatic suspension, shock absorbers
Active damping and engine support
Hydrostatic fan drive, alternator and air conditioning
traction stability systems (ABS / ASR / ASC)
central
Electro-hydraulic convertible roof control
Special hydraulic fluid based on synthetic base oils with excellent low temperature behavior
For use in appropriately marked fluid reservoirs for hydraulic level control support and steering and brake assistance.
Excellent behavior at low temperatures
Designed for the application range from -40 ° C to + 130 ° C. It can therefore also be recommended for recent developments in vehicle hydraulics
Good aging and thermal behavior
Convincing foam and corrosion protection characteristics
Low friction coefficients at low temperatures
Miscible with commercially available steering oils
Manufacturer recommendations:
BMW
Ford WSS M2C204-A / A2
MAN 3289
MB 345.0
Hyundai / Kia PSF-4
Opel 19 40 715/766
Porsche 000.043.203.33/000.043.206.56
Volvo 1161529/30741424
VW TL 52 146 (G 002 000 / G 004 000)
ZF TE-ML 02K
Chrysler / Dodge / Jeep MS-11655
specification
ISO 7308
DIN 51524 part 3
applications:
power steering
rear axle
leveling
Hydropneumatic suspension, shock absorbers
Active damping and engine support
Hydrostatic drive of fan, alternator and air conditioning
Stability traction systems (ABS / ASR / ASC)
central
Electro-hydraulic soft top control
Mineral oil based high performance steering gear oil for use in conventional hydraulic power steering
Viscosity behavior at temperature and high shear stability
Excellent low temperature behavior and permanently safe operation at high temperatures
Excellent aging and Qxidationsstabilität
foaming reduced to a minimum
Neutral towards sealing materials
Miscible with the same commercial specification steering gear oils
Manufacturer recommendations:
DEXRON II-D
MB 236.3
VW 009.300
ZF TE-ML 09
Special high performance products, formulated to offer maximum performance in sports use.
Special hydraulic fluid based on mineral oil
For hydraulic support of leveling systems and steering and braking aids
Excellent behavior at low temperatures
Designed for the application range from -40°C to +100°C
Miscible with commercially available steering gear oils
Application areas:
Power steering
Rear axle steering
Leveling
Hydropneumatic suspensions, shock absorbers
Active damping and engine support
Hydrostatic drive for fan, alternator and air conditioning system
Traction systems for stability (ABS/ASR/ASC)
Central locking
Electro-hydraulic convertible top control
Special mineral oil-based hydraulic fluid with excellent low temperature behavior for Citroën, Mercedes-Benz, Peugeot and Volkswagen vehicles.
Suitable for use in appropriately labeled fluid reservoirs for hydraulic support of level control and steering and braking aids
Designed for the application range from -40°C to +100°C, it is therefore also recommended for the latest developments in vehicle hydraulics
Applications
Electric steering
Rear axle steering
Leveling control
Hydropneumatic suspensions, shock absorbers
Active damping and engine support
Hydrostatic drive for fan, alternator and air conditioning system
Stability and traction systems (ABS/ASR/ASC)
Central locking
Electro-hydraulic convertible top control
High-performance mineral oil-based steering gear oil for use in classic hydraulic power steering systems.
Exceptional viscosity-temperature behavior and high shear stability
Excellent low temperature behavior and safe operation at permanently high temperatures
Exceptional stability to aging and oxidation
Minimized tendency to foam
Neutral towards sealing materials
Miscible with commercially available steering transmission oils of the same specification